FORCE SEND CONDITIONALS

Force send is a special conditional expression LSO supports. The syntax for this expression is (FORCE10) or (FORCE 10). This means that when the flag 10 table location is set to ON, LSO will send all the tags in the current list. LSO will then reset the flag 10 table location to OFF.

In the example, when FLG10 = 1 all the tags under the cycle condition will be sent whether they have changed or not. FLG10 will then be set to zero.

 
• Introduction
   
• LSO overview
   
• The LSO System
   
• Network Tags
   
• Getting started
   
• Configuration
   
  • Comments and Conventions
  • Headers
  • Master-to-Master Communications
  • Network tag list
  • Conditionals
  • Output Configuration
  • Input Configuration
  • LSO information messages
  • Master configured as a console
  • Configuration for file transfer
  • Multiple source configurations
  • LSO and System memory
  • System status
  • LSO system redundancy
  • Force send conditionals
  • TCP/IP protocols support
  • Deadband feature
  • Alarm Handling
  
   
• Operation
   
• Known problems

e-mail us
info@hmi-tech.net

Copyright © HMI Technologies Pvt Ltd.
All rights reserved.